2018 RX 50 Factory

The Aprilia RX 50 Factory is a 50cc trail enduro with a two-stroke engine and liquid cooling that complies with Euro4 regulations thanks to the new engine mounted in 2018. This modern engine has separate lubrication, electric start and an electronic carburettor that is responsible for significantly reducing emissions.

Compare
Category: Tags: , , , , ,

Description

The Aprilia RX 50 Factory is a 50cc trail enduro with a two-stroke engine and liquid cooling that complies with Euro4 regulations thanks to the new engine mounted in 2018. This modern engine has separate lubrication, electric start and an electronic carburettor that is responsible for significantly reducing emissions.

The cycle part of the enduro version is one of the most outstanding in the category, with a steel perimeter chassis and an aluminum swingarm with linkage system. The suspensions are designed for off-road use, with an inverted fork with 41mm bars and 240mm of travel, and a monoshock with 200mm of travel which is not adjustable. Braking has been entrusted to a team of discs placed on each wheel, the 260mm front bitten by a floating caliper – the rear is 220mm.

As in all Aprilia, the aesthetics and finishes have been taken care of to the maximum, this RX having a compact seat, a fuel cap with a key and modern digital instrumentation that is very complete and easy to read.

Additional information

Weight104 kg
Dimensions2105 × 840 × 1365 mm
Displacement

50 cc

Engine

Single cylinder, 2-stroke, light alloy cylinder with liquid cooling.

System

With electronically controlled DELL’ORTO PHVA 17.5 carburettor

Sistema de arranque

Kick starter

Bore x stroke

39,88 X 40 mm

Compression ratio

11.5 : 1

CO2 emissions

72 g/km, Euro4

Final drive

Chain, Transmission ratio: 11/59

Clutch

Multiple disc clutch in oil bath

Drive

6 speeds

Primary Ratio

21/78

Final Ratio

11/59

Relation 1

11/34

Relation 2

15/30

Relation 3

18/27

Relation 4

20/24

Relation 5

22/23

Relation 6

23/22

Frame

Double steel beam

Front wheel suspension

240 mm, Inverted fork, 41mm diameter

Rear wheel suspension

200 mm, Aluminum alloy swingarm, Mono shock absorber with "Progressive Link System"

Brake, front

2 pistons, 260mm disc, Floating clamp, Stainless steel disc.

Brake, rear

1 piston, 220mm disc, Floating caliper, Stainless steel disc.

Tires, front

80/90 21, Vee Rubber

Tires, rear

110/80 18, Vee Rubber

Wheelbase

1.395 mm

Seat height

880 mm

Fuel capacity

7 l

Consumption

2,96 l/100km

Reviews

There are no reviews yet.

Be the first to review “2018 RX 50 Factory”

Your email address will not be published. Required fields are marked *